HISTORY OF CARBON FIBER

-
HISTORY OF CARBON FIBER 

Carbon fiber dates back to 1879. Inventor Thomas Edison used carbon fibers as filaments for early light bulbs (Hegde, 2004). Although these fibers lacked the tensile strength of today's carbon fibers, their considerable tolerance to heat made these fibers ideal for conducting electricity. Edison’s carbon fibers were made out of cellulose-based materials, such as cotton or bamboo, unlike the petroleum-based precursors used today. Carbonization took place by baking bamboo filaments at high temperatures in a controlled atmosphere. This is a method known as "pyrolysis," which is still used today. The resulting carbonized bamboo filaments were fire-resistant and capable of enduring the intense heat needed for incandescence.
It wasn't until the late 1950's that high tensile strength carbon fibers were discovered. Rayon became the first precursor used to create these modern fibers. Ultimately, it was replaced by more effective materials such as polyacrylonitrile (PAN) and pitch.
The benefits of these high-strength fibers were clear. They weighed a fraction of the weight of steel, yet contained much greater tensile strength. Another important benefit of carbon fiber was its high modulus, or resistance to stretching. This inelasticity plays an important role in reinforcing rigid structures such as the nose cones in hypersonic aircraft.
In recent decades, carbon fibers have found wide application in commercial and civilian aircraft, recreational, industrial, and transportation markets. Carbon fibers are used in composites with a lightweight matrix. Carbon fiber composites are ideally suited to applications where strength, stiffness, lower weight, and outstanding fatigue characteristics are critical requirements. They also can be used in the occasion where high temperature, chemical inertness and high damping are important. The suppliers of Advanced Composites Materials Association released 1997 industry statistics on worldwide shipments of carbon fibers for composites 
 However, from 1997 to 1999 there was a global slowing of carbon fiber demand . According to Mitsubishi Rayon Co. Ltd. (Tokyo, Japan), a carbon fiber producer, worldwide consumption for sporting goods is nearly 11 million lb of carbon fiber.

If you want to know What is carbon fiber made of ? CLICK HERE

Comments

Post a Comment

Popular posts from this blog

ORIENTATION OF CARBON FIBER

-
Image
Carbon fiber comes in two Weaves: 1 . Unidirectional (all fibers are parallel):  In a 0-degree orientation, aligned with the fibers, unidirectional (UD) carbon fiber provides high bending strength against the progression of forces, which makes it perfect for the carbon-fiber prosthetic blades used by Paralympic sprinters. In a 90-degree orientation, perpendicular to the fibers, it flexes. In either orientation, it has low torsional strength. In all applications, another layer of fabric, such as Perlon, must be laid under and over UD carbon-fiber weave. 2. Bidirectional (fibers cross at a 90-degree angle):  In a 0-degree or a 90-degree orientation, bidirectional carbon fiber features medium bending strength and medium torsional strength. At a 45-degree orientation, it is more flexible and has high torsional strength, which are just the right properties for a transfemoral socket, for example. You can even tailor the composite's properties with fiber length, the type of weave...
Read more